NRC_RunqueueInsertMOVL(int vel, int acc, int dec, const NRC_Position& target, int pl=0)

Insert MOVL instruction in the run queue

Before calling this function, please call NRC_CreateNoFlieRunqueue() to create a fileless run queue

Type

int=>Insert MOVL instruction in the run queue

Return value	Description
0	The function is called successfully
-101	Invalid input parameter
-102	The target object does not exist. This typically occurs when the system initialization is incomplete, and calling other functions may return this value
-103	The target object is currently in an inoperable state

Parameter Option

Parameter	Type	Description
vel	int	The running speed of the robot, expressed as the absolute speed of the TCP in millimeters per second (mm/s). Parameter range: vel > 1
acc	int	Robot running acceleration, as a percentage of the maximum acceleration for each joint of the robot. Parameter range: 0 < acc <= 100
dec	int	Robot running deceleration, as a percentage of the maximum deceleration for each joint of the robot. Parameter range: 0 < dec <= 100
target	const NRC_Position&	Robot motion target position, see NRC_Position for details
pl	int	Smoothness, which refers to the smooth transition between the current and the next movement instructions. The higher the value of pl, the smoother the transition, but the greater the trajectory deviation. The range of the parameter is 0 <= pl <= 5

Sample code

NRC_Position target={NRC_ACS,10,10,10,10,10,10};
NRC_RunqueueInsertMOVL(50,5,5,target,5);
//Insert MOVL instruction in the run queue, vel=50mm/s, acc=5, dec=5, PL=5